Skip to content
    Gavin Mai

    MeshCore Map

    I wanted to see where MeshCore radios are, around the world and in places like Puerto Rico.

    How to read this & what to try

    Each dot is a MeshCore radio that has shared its position. Green dots are repeaters, the radios on roofs and hills that pass messages along. Blue dots are companions, the radios people pair with their phones. Zoomed out, the glow shows where radios are packed together.

    Every MeshCore radio sends a short advert now and then to say it exists. The timeline under the map plays back the latest advert from each radio over the last day or week, sped up, as a ring on the map. Bright dots were heard in the last day, softer ones in the last week or month. Colour by radio preset to see which radios could hear each other: they need the same frequency, bandwidth and spreading factor. The shading shows hills, which matter a lot for radio.

    Try this: Pick Puerto Rico and watch its radios check in. Search for your town, select a repeater, then check line of sight to another radio or see where its signal could reach. Drag the timeline to see what was heard when.

    Positions come from the public MeshCore map and are whatever each owner entered. Only each radio's latest advert is known, times are rounded (to the hour after the first hour, to six hours after the first day), and adverts often reach the map an hour or more after they are sent. Messages hopping between repeaters aren't shown. Line of sight and coverage use ground height only: trees, buildings and weather aren't counted, so real range is usually shorter. MeshCore map ↗

    Loading radios from the MeshCore map…

    Heard in the last day
    —
    Heard in the last week
    —
    Repeaters this week
    —
    In view
    —
    Loading radios…

    Rings show each radio’s latest advert as the playhead passes it. Times are approximate: they’re rounded, and adverts often reach the MeshCore map an hour or more after they’re sent.

    New to MeshCore? Read Meshtastic vs MeshCore, how to flash MeshCore onto a radio, or get MeshCore++ for iPhone. Radio positions from the MeshCore map ↗. Basemap from OpenFreeMap, OpenMapTiles and OpenStreetMap contributors; terrain from AWS Terrain Tiles (Mapzen). Places: GeoNames (geonames.org), CC BY 4.0.